Megapixels | 3MP |
---|---|
brand | Ruralcam |
4G camera | 4G solar powered CCTV camera |
featured | Yes |
Featured Product | Yes |
Base | /s/l/sleeping_mode_camera_1_2.jpg |
Small | /s/l/sleeping_mode_camera_1_2.jpg |
WH3M0WGSN1M0 3G 3MP IR wake up waterproof outdoor snapshot camera with built in battery and solar panel
WH3M0WGSN1M0 WCDMA 3MP day / 1MP night IR wake up waterproof outdoor snapshot camera with built in battery and solar panel
Rural Cam has launched the latest in mobile CCTV solutions with a range of WCDMA waterproof outdoor snapshot camera used for remote surveillance solutions for when there is not WLAN or ethernet network connection available in outside buildings. The camera will take snapshot pictures at intervals and send back over a wireless HSPA/UMTS 3G connection via FTP, MMS, SMS or email to a smartphone or connected PC. The camera is designed to sleep to save the built-in internal lithium ion batteries and will wake up when motion is detected or the camera is triggered by either additional PIRsensors or sitches that can be attached via a terminal connector on the cable loom.
Main features:
1. There exists CMS for mass storage, which can manage up to three thousand front snapshot cameras and ten customer consoles to access on line at the same time
2. Support up to 3.0 Megapixel (2560x1920) image resolution
3. Adopting double image sensors and lens to get qualified pictures in both day and night; IR Led on only when snapshot to make it low power consumption
4. Built-in Web server for preview and configure via IE
5. Supporting Video clips recording functions
6. Supporting GSM/GPRS/EDGE/3G Mobile Network
7. Store and forward function.
When the 3G network temporary is not available, the pictures will be stored in the camera and then be forwarded to the CMS or to FTP server when the mobile network is available
8. Supporting several power supplier modes:
A. Main power supply (DC12V±10%)
B. Sleeping mode camera use a samll solar panel to powered the built in Li battery directly
9. Supporting multi communication ways (SMS, Email, FTP and smart and scalable integrated PC software).
10. Picture snapshot trigged by several ways:
A. On scheduled time
B. On command from user. User can command the camera to take pictures by PC client software
C. SMS. User can send SMS to the camera to take pictures
D. External Signal triggering. The camera can provide two external alarm signal interface (If for PIR, the camera can provide PIR voltage too)
11. Up to 32 GB SD/SDHC local storage
12. Watchdog built-in assure its stability
GSM/GPRS/WCDMA Remote Snapshot Solution
Outline
This Smart GSM/GPRS/3G Remote Camera system will capture a photo and send it to you via a cellular network. The picture's resolution can up to 3M(2560x1920). The Remote Camera also include a local storage SD card to avoid failure of the cellular network.
This system is equipped with multiple I/O expansion and can be easily interfaced to external equipment and can also be expanded with audio hardware to allow remote listening. It can connect various surveillance sensors such as door magnet sensor, gas sensor,PIR sensor, smoke sensor, and so on.
The camera can be trigged to capture by the following ways:
On schedule time |
On demand from user |
Signal from one of the sensors |
You can command the Remote Camera to contact you via the following ways.
FTP |
MMS/SMS |
Integrated PC software. The system also integrate a set of PC software including central managemnt system server and user client. User can control the remote camera via the client software to do capture on demand. |
Main Features
There is no additional constrains to SIM card(ie. The device can work well even if the SIM card with private IP address) |
High definition up to 3M(2048x1536) |
Various image formats(2560x1920, 2048x1536,1600x1200,1280x960,640x480,320x240) |
Multi functional trigging ways(On schedule,On demand, Signal trigging) |
Multi communction ways(MMS, Email, Ftp, smart and scalable integrated PC software) |
JPEG compression |
Supporting local storage |
Lens can be selectable |
Device scallable |
Application domains
Geology and forestry monitoring rockslides, floods, fires, wildlife and vandalism |
Transformer station surveillance |
Construction site monitoring working progress and valuable equipment |
Ferryboats, dredges and other marine acquiring the pictures you require from the vessel |
Oil and gas pipelines surveillance |
Power station surveillance |
GSM BS Surveillance |
Home surveillance |
Traffic control |
Snapshot Central Menagement System(CMS)
![]() |
Specification:
Parts |
Items |
WH3M0WGSN1M0 |
Camera |
Image Sensor |
1/2.7" 3.0 Megapixel CMOS Sensor(For Day time) 1/4" 1.0 Megapixel CMOS sensor (For Night time) |
Min. Illumination |
Color: 0.2Lux @ F1.2 , B / W: 0.02Lux @ F1.2 |
|
Electronic Shutter |
1/25s~1/100,000s |
|
Day/Night |
Auto-switch, 3.0Megapixel(Day); 1.0 Megapixel(Night) To get qualified images in both day and night |
|
Lens Mount |
C/CS |
|
Compression Standard |
Picture Format |
JPEG |
Video H.264 |
Optional |
|
Image |
Max. Resolution |
2560x1920 |
Video Parameter |
Saturation, Brightness, Contrast adjustable |
|
GSM/GPRS Network |
Protocols |
TCP/IP,HTTP,FTP,DHCP,DNS,DDNS,NTP |
Frequency bands |
GSM/GPRS/EDGE:1900/1800/900/850MHz |
|
Maximum data transmission rate |
GPRS: 42.8(UL)/85.6(DL) kbps |
|
Media Transportation |
FTP, Email |
|
Interface |
Intelligent Notify |
Power Failed, Storage exception |
PIR interface |
Support external PIR |
|
Alarm Input |
2 channel |
|
Alarm Output |
1 channel |
|
Local Storage |
Support SD/SDHC |
|
SMS |
Support |
|
Basics |
Anti-flicker, Heartbeat, Password Protection |
|
General |
Operating Condition |
-10°~60° Humidity 90% or less |
Weather Proof |
IP66 |
|
Power Supply |
Support DC12V±10% and solar panel powered the built in libattery directly |
|
Power Consumption |
8W MAX |
Megapixels | 3MP |
---|---|
brand | Ruralcam |
4G camera | 4G solar powered CCTV camera |
featured | Yes |
Featured Product | Yes |
Base | /s/l/sleeping_mode_camera_1_2.jpg |
Small | /s/l/sleeping_mode_camera_1_2.jpg |