CWT5110 GPRS RTU GSM alarm and controller 8DI, 8DO, GPRS, SMS control
CWT5110 GPRS RTU enables various kinds of devices with I/O and Standard protocols to communicate over GSM/GPRS network and the Internet easily and freely. It can construct a smooth GPRS Data Tunnel between Host End and Remote End, ensuring an efficient communication for data transmission and remote device management. CWT5110 is an ideal solution for factory automation, environmental monitoring and remote device management for M2M industry. There is a built-in microprocessor chip running on a real-time operating system. It gives immediate response to any change in both inputs and outputs condition. A GSM modem is embedded in the RTU, user has to subscribe a SIM card for the RTU. The RTU can be installed in any location under GSM coverage.
4DI + 4DO + GPRS transmission + sms alarm/control
Function Descriptions :
Easy setup with any terminal
Emulator software
Flexible messages, recipients & options setting
Time stamped alarm messages
No need to use a PC
Easy for external application
Dedicated standalone operation
2 watchdog inside, 724 operation
Low cost of ownership
10 SMS alarm recipients (operation group)
RS232 Bidirectional data transmission
Alarm buzzer
4 relay drivable outputs(12V-24V)
4 protected universal digital inputs. Accepts dry contact
Temperature sensor inside(optional)
Battery inside
Industrial design with intelligent software capabilities, making it a reliable GPRS solution for data collection and transmission
Multiple GPRS Transmission modes can be set, such as timer transmission, I/O trigger GPRS Transmission
Connect to any serial device to GPRS and the Internet
No need to build expensive fixed line network, saving cost substantially
Reliable GPRS network connection, providing fast and cost-effective long-range wireless communication
